$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
$24.99 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
Adaptors for Benno Boost E and Carry On allow for the use of Thule trailers.
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Thule's Bicycle Trailer Kit easily converts your Thule Chariot carrier (sold separately) into a stable, sturdy bike trailer. With Thule's Axle Mount ezHitch system, attachment and removal are quick and easy. You even get a tall flag and reflector kit for enhanced visibility.
Whether your day includes a quick trip downtown or a longer bicycle-based adventure, Thule's Cadence is a great way to amp up your family's taste for the open road. Boasting Thule's super-stable ezHitch bicycle attachment for confidence and ease of use, the Cadence comfortably seats two children in padded seats with five-point harnesses. You also get extra storage space for accessories, as well as a visibility-increasing safety flag. When your trip is over, the Coaster folds down quickly and easily for transport and storage.
- Bicycle Trailer Kit included - Secure attachment to bike using Thule ezHitch axle mount - Extra storage space for hauling around cargo - Easy folding for storage and transporting - Comfortably seats two children - Compatible with a range of accessories - Meets international safety standards
Convert your Thule Chariot into a high-performance jogging stroller. - Simple installation by clicking the kit into Thule VersaWing - Convenient tracking adjustment to make sure the carrier tracks straight - Includes pocket for easy storage of the jogging wheel when not in use
Thule Coaster is a durable bicycle trailer that provides a safe, comfortable ride and easily transforms to a stroller once you reach your destination. - Bicycle Trailer Kit and Stroller Kit included - Easy conversion from cycling to strolling - Secure attachment to bike using Thule’s patented ezHitch - On-board storage of strolling wheel - Comfortably seats two children - HeightRight adjustable handlebar for parents comfort - Compatible with a range of accessories - Easy folding for storage and transporting - Extra storage space for hauling around cargo - Meets international safety standards Technical specifications - Children: 1 or 2 - Meets safety standards: Yes - 5-point child safety harness: Yes - Shoulder width: 23 in - Weight capacity: 100 lb - Weight: 24.2 lb - Sitting height: 23.6 in - Pass through: 31.5 in - Folded dimensions (LxWxH): 37 in x 30 in x 9 in - Dimensions (LxWxH): 54 in x 30 in x 40.5 in
- Bicycle Trailer Kit and Stroller Kit included. - Easy conversion from cycling to strolling. - Secure attachment to bike using Thule ezHitch axle mount - On-board storage of strolling wheel. - Comfortably seats two children - Adjustable handlebar—ergonomic, adjustable handlebar for maximum parent comfort - Compatible with a range of accessories - Easy folding for storage and transporting - Extra storage space for hauling around cargo - Meets international safety standards
Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.
Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.
Surly's Bill Trailer is brilliantly engineered to carry almost everything! This seriously stout workhorse is built from chromoly with stainless-steel hardware for excellent durability and it rolls on quality 16-inch wheels and tires. There are even fenders. The trailer sits perfectly level as you ride, so even heavy and bulky items stay secure. You can tote up to 300 pounds of whatever on this bad boy! So go ahead, run all your errands by bike — you'll be smiling when you get back home. Please note that the required Surly hitch for this trailer is sold separately.
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
This is our Excellent Adventure Thru-Axle. It upgrades your bike's rear end for hauling cargo trailers, should you feel like taking Rufus along on your errands. Extensive product testing with our Bill and Ted Trailers provided an "awesome experience," but time travel remains a risky endeavor. Designed for use with slotted horizontal or vertical single-position dropouts, the Excellent Adventure Axle is compatible only with 12 x 148mm hubs. Compatible Surly models include Skid Loader, our compact electric cargo bike, as well as Karate Monkey, Krampus, Grappler, Ogre, Lowside, ECR, and Troll. Once again, the 12 x 148mm hub requirement cannot be overstated. Visit your local Surly dealer to discuss other scenarios you may have in mind. - 12 x 148mm hub compatibility only - Designed for use only with Surly's Bill and Ted Trailers - Works with slotted horizontal or vertical single-position dropouts
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly's Ted Trailer is brilliantly engineered to carry almost everything! This seriously stout workhorse is built from chromoly with stainless-steel hardware for excellent durability and it rolls on quality 16-inch wheels and tires. There are even fenders. The trailer sits perfectly level as you ride, so you can haul longer items that extend off the back. You can tote up to 300 pounds of whatever on this bad boy! So go ahead, run all your errands by bike — you'll be smiling when you get back home. Please note that the required Surly hitch for this trailer is sold separately.
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Surly Trailer Parts
Surly Trailer Parts
$62.00 - $65.00
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle
Don’t let your adventures be limited to the pavement. The 16+ Wheel Kit improves handling over snow, sand and gravel. The kit includes two 16x3” push button wheels with a knobby tread. A wide range of acceptable tire pressures let you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps for your passengers. Say goodbye to the sidewalk. Constructed with aluminum rim/hub and stainless steel spokes.
Take your Burley all over town with the 2-Wheel Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. Leveling springs keep the stroller grounded on uneven terrain. Get out and explore with added versatility. - Easy conversion from biking to strolling - Fully pivoting wheels provide optimal maneuverability - Wheels easily slide into the trailer mounts - Includes: 8-inch Stroller Wheels (2) & Wrist Tether - Compatible with: 2019 – D’Lite X, 2019 – D’Lite Single, 2019 – Cub X, 2019 – Encore X, 2007-Current – D’Lite, 2007-Current – Encore, 2007-2018 – Solo, & 2010-2018 – Cub
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Keep extra treats, leashes, and other essentials handy with the Bark Ranger™ Bag. Attachment points along the top of the Bark Ranger™ and Bark Ranger™ XL let you quickly and securely increase your trailer's cargo capacity. Large and small zippered pockets provide multiple storage options for you and your pet's gear while on the go.
Ensure your pet’s trailer stays level during mid-ride breaks or pauses with The Bark Ranger™ Kickstands. Your dog will feel secure and comfortable with the added stability of these convenient kickstands. Biking or strolling, the Bark Ranger™ Kickstand helps your dog’s trailer stay level and steady when not in motion. Easy to fold and unfold, the kickstand can be installed on the front or back of the trailer to allow for stable loading and unloading. When you pause for a mid-ride water break or stop to talk to a friend during a stroll, the kickstand provides added stability to keep your pet feeling secure and comfortable. Pro tip: use the kickstand while training to stabilize the trailer during loading and unloading to help make your pet feel more at ease! You’ll Love – - Compatible with Bark Ranger™ and Bark Ranger™ XL pet trailer - Easily deploy to activate or fold to stow - Mounts to front or back of the trailer for stable loading and unloading of your furry friends Specifications: - Size L x W x H (in) 11.2 x 0.9 x 3 - Size L x W x H (cm) 28.5 x 2.3 x 7.5
Ensure your pet’s trailer stays level during mid-ride breaks or pauses with The Bark Ranger™ XL Kickstand. Your dog will feel secure and comfortable with the added stability of these convenient kickstands. Designed to support bigger dogs in the Bark Ranger™ XL, the Bark Ranger™ XL Kickstand provides added stability for your dog’s trailer. The kickstand attaches to the front or rear of the trailer and helps your dog feel secure by keeping the trailer level during mid-ride pauses or when loading and unloading. When it’s time to head out, simply fold up the kickstand and you’re ready to roll. Pro tip: use the kickstand while training to stabilize the trailer during loading and unloading to help make your pet feel more at ease! You’ll Love – - Compatible with Bark Ranger™ and Bark Ranger™ XL pet trailer - Easily deploy to activate or fold to stow - Mounts to front or back of the trailer for stable loading and unloading of your furry friends Specifications: - Dimensions L x W x H (in) 15.2 x 0.9 x 3 - Dimensions L x W x H (cm) 38.5 x 2.3 x 7.5
Page 1 of 3 Next page