Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Shop
Hydration backpack designed for mountain biking and long rides in remote locations where extra water carrying capacity and increased storage are essential.
It features our custom 2L fast-flow bladder, a 12L main storage compartment and an additional 2L of capacity spread across easy-access pockets.
- Lightweight, breathable 3D mesh construction
- 70D lightweight ripstop with TPU waterproof coating
- Internal lycra stash pocket and stretch mesh side pockets
- Optimised for refilling without removing the bladder
- Quick release buckles incorporating magnetic hydration hose clip
- Available in two sizes to enable the perfect fit for all body shapes
- S/M is designed for riders with a 96-125cm chest circumference
- Total pack capacity: 14.5 L
- 465g
Designed to simplify thousands of hangers into one universal design that can be easily stocked by your local bike shop. Our hanger is uniquely forged and fully machined from aluminium giving you the toughest hanger possible. We always recommend having a spare to be sure of no missed rides.
- Compatible with all frames designed to accept the SRAM UDH
- Compatible with all MTB and E-MTB drivetrains
- Forged and Fully Machined from 7075 Aluminium
- Supplied with Mounting Screw and Washer
- Thru Axle Pitch M12 x 1.0
Manufacturer’s part number: AC-DRHG-MTB-A4
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature a get out of jail 6mm Allen key on the drive side of the axle if you manage to round the non drive side. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer’s exact specifications.
Manufacturer’s Part Number: 01.21.51.0148
Fits:
Spire Alloy 2021 - 2023
Spire Carbon 2021 - 2023
Relay Carbon 2023
Patrol Alloy 2021 - 2023
Patrol Carbon 2022 - 2023
Repeater 2022 - 2023
Sentinel Alloy 2021 - 2023
Scout Alloy 2021 - 2023
Smuggler Alloy 2023
Smuggler Carbon 2024
Day In Day Out
An e-bike for any day and anywhere. Fun and light to rip around the neighborhood for meet ups, running errands or Sunday fun days.
Where it thrives
In town, leisurely rides, crowded streets
What it's built for
Agility, comfort and ease
Highlights
- Light, powerful Hydrive rear-hub drive system / 250Wh Battery
- 7-speed drivetrain / Tektro mechanical disc brakes
- Comfort saddle / Upright handlebar
It's light, comfy and playful. It's easy to get on and off, and even easier to ride. With its lightweight, powerful drive system Treadwell Neo keeps the effort low, and the fun level high.
Invisible and powerful assist
The Hydrive electric assist system gives you the power to do more. With its strong 250w rear hub motor and hidden 250Wh battery, it's just like riding a bike, only easier.
Easy Switch
Toggle between modes from the comfort of your handlebars. The switch, placed within easy reach of your hands, allows you to change modes for pedal assist, and keep track of your battery power with the conveniently placed indicator lights.
Light as a Feather
The featherweight build means you can pedal the Treadwell Neo 2 with ease. Get some exercise when you want to, power up when you need it, and never feel worried when your battery is running low.
The Pressure is simply a refinement of our ever popular Contact pedal. The Pressure has a longer body than the Contact, but retains the smallest Q-Factor in the fleet. This makes it ideal for DJ and freeride, but many riders do like to use them for DH and trail riding too.
The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation.
KEY FEATURES
- Dot Fluid Calipers will have Bore Caps with a D etched.
- Mineral Oil Caliper will have Bore Caps with an M etched.
- Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount
- Calipers designed to fit 140, 160 & 180mm rotors
- Slimline 4 piston lightweight design
- Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub
- Available in Black, Silver, Bronze, Red, Blue, Purple and Orange
- Top entry pad fitting
- CNC machined from 2014 T6 aluminium
***Please note***
Shimano and SRAM brands belong to a third party and have no relation with Hope Technology
RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems
(Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo)
Shimano Compatible Calipers (RX4+)
Dura Ace Di2 R9270 / R9170 / R9120 / R9200
Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 /
105 Di2 R7170 / R7020 / Di2 R785 / RS685 /
GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2
Campagnolo Compatible Calipers (RX4+)
Ekar / Super Record / Record / Campagnolo H11
SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid)
Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS /
Sram Rival / Sram Apex / Sram S900
The Tech 4 V4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation.
The updated V4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use.
KEY FEATURES
- Increased power versus Tech 3
- Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking.
- Hinged clamp reducing weight and to improve ergonomics
- Tool free bite point and reach adjustments
- Hybrid piston design
- Rigid CNC'd one piece caliper
- Compatible with a wider range of current shifter options
- Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange.
- Choose either standard or braided hose (braided hose is an extra cost)
- 30% pressure increase compared with the Tech 3 brake
- Reservoir area increased to lower overall stack height.
- Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options.
- Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use.
- The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3
- All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here.
- Max rotor thickness with V4 Caliper 3.3mm
- Available in Black, Silver, Bronze, Red, Blue, Orange & Purple
**Please Note**
The V4 caliper is not compatible with all direct mount 180mm forks due to the large piston design and variation in mount positions. We recommend running the V4 caliper with the correct mount and a 200mm rotor in this application.
The V4 caliper is also not compatible with the 2021 Commencal Supreme DH frame 200mm Direct Postmount
Brake pads include spring clip and pin
Brake pads are dyno tested in-house in Barnoldswick
Available for all our current brakes and older models
All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity
We keep a wide range of pads to suit all our brakes
Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire.
Rubber:
Dual compound (best for dry, hard conditions)
3C MaxxTerra (best for mixed conditions)
3C MaxxGrip (best for soft, wet conditions)
Casings:
60 TPI + EXO (general trail use)
EXO+ (heavy duty trail use)
DoubleDown (enduro use)
Downhill (DH race, bike park, gravity)
Wide Trail (WT) sizes are optimized for 30-35mm inner width rims
Tubeless Ready specs are denoted with a “TR” in the tables below
Category: Trail, Enduro, Downhill
Recommended use: All trail, enduro, and downhill conditions
Recommended installation: Front
With numerous race wins under its belt and untold miles of backroad adventures, the Rambler is our most popular gravel offering. Tightly-packed center knobs are ramped for rolling efficiency on hardpack roads and asphalt. The cornering knobs are spaced farther apart for control in variable conditions.
The Back-Roller Core is the solid base bag among the Back-Rollers and yet 100% waterproof. With its robust polyester fabric, it's not only suitable for extended bike tours but also ideal for daily urban commutes. With the Back-Roller Core, you're always ready to transport important items dry and securely – whether it's on your way to work, shopping, or other urban adventures. A reliable companion that withstands the elements and simplifies your everyday life.
If the basic functions of the Back-Roller Core are ever insufficient, this practical bag can be expanded with various optional accessories. The Carrying System Bike Pannier helps carry the Back-Roller Core on your back, various inserts provide stability to the bag body off the bike, or offer better organization inside the rear bike bag.
FURTHER PRACTICAL DETAILS
- High-visibility reflectors on the outside of the bag.
There’s something about 7/8" (aka 22.2mm) handlebars that seem to attract the most abusive riders out there, so we’ve taken our popular Boxcar stem and beefed it up even further!
We already use 2024 alloy for all of our boxcar stems, as it has a higher fatigue and yield strength than 6061. We made sure the clamp was extra thick on this version and even added 2 more high-strength stainless faceplate screws.
Is it overkill? Definitely. You’d have to run this thing over in a tank to damage it, but we’re pretty sure this will be the last 7/8" stem you’ll ever have to buy.
- Machined in sunny Chico, California
- 6 bolt faceplate (stainless T25 bolts)
- 7/8" (22.2mm) bar clamp
- Stack height: 36mm
- 180g
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Beveled Banjo Hydraulic Brake Hose Kit fits SRAM road bike brakes that feature a beveled banjo fitting at the lever
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, extra banjos, hose clips, and T8 Torx L-Key
- Compatible with Flat Mount, RED 22, Force 22, Rival 22, Force 1, Force CX1, Apex1 HRD, S700
- All around Urban tire
- Double Defense (DD) puncture protection and 3mm GreenGuard protective layer
- Endurance compound and 67tpi casing for unmatched durability
CNC machined 6061 aluminum
Black anodized finish
For Orbea 2020+ MTB frames with 12mm thru-axle. Includes fixing ring.
Orbea: Hanger # 50/X160
Orbea
Occam - 2020+
Rise - 2020+
Wild - 2020+
$1.65 - $27.95
Our unsweetened Hydration Everyday Drink Mix is made with electrolytes and a squeeze of real fruit. It's for those times when you're thirsty and need electrolytes but nothing more. It’s not a one-sip pony. You can also combine it with our other mixes or use multiple servings to customize electrolytes for your individual needs.
$1.79
- Made from tool steel, then computer controlled heat treated for exceptional durability
- Universal 1/4" fit for all standard bit holders and power tools
- Professional quality tools, intended for shop use
$1.79
- Made from tool steel, then computer controlled heat treated for exceptional durability
- Universal 1/4" fit for all standard bit holders and power tools
- Professional quality tools, intended for shop use
$2.27 - $2.29
- Made from tool steel, then computer controlled heat treated for exceptional durability
- Universal 1/4" fit for all standard bit holders and power tools
- Professional quality tools, intended for shop use
$2.48
- Compatible with 5-12 speed; 3/32" and 1/8" single speed chains
- Features a Smart Cradle System which is adjustable, use with almost all chains
- Full aluminum construction with S2 steel pin
$3.99
An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level.
- 5-pack
$4.40 - $4.62
- Exact fit precision machined tip
- Precision finger tip control cap
- Molded handles are proportionate to blade size
- 50mm in length
- Professional quality tools, intended for shop use
$4.61
When you’ve got to finish your bike off right.
The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit.
Mix and Match to suit your bike.
***Top Cap only works with Burgtec Top Cap Bolt***
$4.99
The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!
Page 1 of 60
Next page