Filter By:
- Bar Ends (14)
- BMX (47)
- Bottom Brackets (227)
- Brakes/Levers/Pads (623)
- Cables (207)
- Cassettes/Freewheels (155)
- Chainrings (293)
- Chains (138)
- Show More Categories
- Cranksets (299)
- Derailleurs (169)
- Forks (141)
- Groups (19)
- Handlebar Grips/Tape (290)
- Handlebars (318)
- Headsets (169)
- Pedals (306)
- Saddles (360)
- Seatposts (99)
- Shift/Brake Combinations (78)
- Shifters (119)
- Shocks (40)
- Stems (133)
- Other (1962)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.
Compatible with: DIVINE SL and DIVINE SL RASCAL
Service kit for 100 hour service (readjusting play and replacing wiper).
Kit includes:
- 1x Wiper
- 6x Glide pin
- 1x Lower bushing
- 1x Foam ring
- 1x C-clip
- 1x Upper bushing
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, without line marking)
- 1x Foam ring
- 1x C-clip R12
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, with line marking)
- 1x Foam ring
- 1x C-clip R12
- Perforated leather handlebar tape
- Genuine perforated leather
- Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips
- Self Adhesive: Yes
- Tape Length: 215mm
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date.
We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market.
From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal.
- Weight: 379g
- Platform material: 7075 Alloy
- Profile: 15mm
- Platform: 100mm x 102mm
- Dish: 2mm (concave)
- Pin material: Stainless steel
- Pin width: 3.5mm
- Pin height: 4.5mm
- Axle Material: EN24T Steel
- Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control.
- Uni-Directional Carbon
- 800mm width
- 9 degree backsweep
- 4 degree upsweep
- Suggested cut down marks
- Weight: 280g
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
"Make a grip with the fussiest rider on the planet, you must be mad!!"
The Bartender Pro is the next level in grip design for Burgtec.
We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening.
- 31.5mm Diameter.
- 30A Rubber Compound
- Single Lock On
When you’ve got to finish your bike off right.
The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit.
Mix and Match to suit your bike.
***Top Cap only works with Burgtec Top Cap Bolt***
The Pressure is simply a refinement of our ever popular Contact pedal. The Pressure has a longer body than the Contact, but retains the smallest Q-Factor in the fleet. This makes it ideal for DJ and freeride, but many riders do like to use them for DH and trail riding too.
Fits all Road or Mountain bikes with BB90 or BB95 shell
- Includes two bearings and two seals
- Compatible with 24mm spindle cranks
- Grade 10 steel balls; ABEC-3 precision
- 50g
ABI Headset Bearing for new builds or replacements.
- Performance unisex saddle
- Short nose allows for a more aggressive, aero riding position
- Pressure relief channel provides all day comfort
- Wide rear width provides additional stability
- Tuned to deliver comfort on race day
All day performance
Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead.
- Rails: Carbon (9x7mm)
- Base: Flexible Nylon
- Cover: Waterproof microfibre
- Profile: Flat
- Weight: 182g
- Width: 142mm
- Length: 240mm
- Mid rail to saddle topper: 45mm
Short for speed
The latest evolution of our award-winning Line Saddle, we’ve combined our technological know-how and experience along with thousands of riding hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient.
Increase your endurance
Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split-piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivaled comfort on an all-out performance saddle.
Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you’re heading to the podium or your new PB.
Flat is for flat out/
Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.
Made from 100% naturally grippy, medical-grade silicone, this grip is designed to keep you in control. The oversized lock-on grip is extra thick for high comfort, with durable rubberized bar ends to stop scuffs.
- Pure silicone
- Ovalised core
- Lock-on design
- Durable and tough
- Diameter: 32mm
- Length: 135mm
- Weight: 108g pair
Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination.
KEY FEATURES
- Replaceable stainless steel bearings (resist corrosion)
- Split crown race for easy installation and removal
- Wide selection of different cup sizes to fit most headset combinations
- Multiple seals to keep out the elements
- Available in black, silver, bronze, blue, red, purple and orange
- Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination
- Head Doctor top cap sold seperately
- Headset cups use custom made, replaceable stainless steel bearings to resist corrosion
- The cups are all machined from 2014 T6 aluminium
- Sealing is achieved through an adjustable taper ring cover and integrated rubber seal
Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own
FEATURES
- Constructed in two parts, aluminium centre and stainless steel braking surface.
- High performance disc, allowing the stainless steel outer to expand separately
from the centre and handle high temperatures without warping.
- Hope floating rotors have a true floating design which allows 1 degree of freedom.
This means the outer is always free to expand when subjected to heat.
- Lightweight design.
- Aluminium centre acts as heat sink keeping disc temperatures lower.
- CNC machined centre is stiff and lightweight so has the advantages
of a thicker fixed disc without the weight penalty.
The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation.
KEY FEATURES
- Dot Fluid Calipers will have Bore Caps with a D etched.
- Mineral Oil Caliper will have Bore Caps with an M etched.
- Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount
- Calipers designed to fit 140, 160 & 180mm rotors
- Slimline 4 piston lightweight design
- Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub
- Available in Black, Silver, Bronze, Red, Blue, Purple and Orange
- Top entry pad fitting
- CNC machined from 2014 T6 aluminium
***Please note***
Shimano and SRAM brands belong to a third party and have no relation with Hope Technology
RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems
(Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo)
Shimano Compatible Calipers (RX4+)
Dura Ace Di2 R9270 / R9170 / R9120 / R9200
Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 /
105 Di2 R7170 / R7020 / Di2 R785 / RS685 /
GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2
Campagnolo Compatible Calipers (RX4+)
Ekar / Super Record / Record / Campagnolo H11
SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid)
Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS /
Sram Rival / Sram Apex / Sram S900
The Tech 4 V4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation.
The updated V4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use.
KEY FEATURES
- Increased power versus Tech 3
- Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking.
- Hinged clamp reducing weight and to improve ergonomics
- Tool free bite point and reach adjustments
- Hybrid piston design
- Rigid CNC'd one piece caliper
- Compatible with a wider range of current shifter options
- Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange.
- Choose either standard or braided hose (braided hose is an extra cost)
- 30% pressure increase compared with the Tech 3 brake
- Reservoir area increased to lower overall stack height.
- Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options.
- Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use.
- The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3
- All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here.
- Max rotor thickness with V4 Caliper 3.3mm
- Available in Black, Silver, Bronze, Red, Blue, Orange & Purple
**Please Note**
The V4 caliper is not compatible with all direct mount 180mm forks due to the large piston design and variation in mount positions. We recommend running the V4 caliper with the correct mount and a 200mm rotor in this application.
The V4 caliper is also not compatible with the 2021 Commencal Supreme DH frame 200mm Direct Postmount
The XCR Pro lever is the ultimate in lightweight design. With a Carbon lever blade and titanium hardware, combined with an XCR X2 caliper you have the benchmark lightweight brake
KEY FEATURES
- Lightweight minimalist design
- Carbon blade and titanium hardware
- Lever reach adjustment
- Hinge clamp for easy installation
- CNC Machined from high grade forged aluminium billet
- 10% Power increase over Race Evo lever
- Postmount and Flatmount Caliper Options available
- Crimped hose design on caliper
- Rigid CNC'd one piece caliper
- Lightweight aluminium backed pads
- Compatible with all current Tech 3 shifter mounts
- Available in Black, Silver, Bronze, Red, Blue, Orange & Purple
- Available with black hose only
- Weight from 199g
- Maximum Rotor thickness for X2 caliper 2.3mm
Flatmount Caliper Mount options:
- Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks
- Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames
- The caliper will also fit directly on Flatmount rear standard using a Ø140 disc. For more information please see Hope's guides in the manuals and diagrams section.
**Note** - The Flatmount X2 caliper is designed for use with the Hope Tech 3, XCR Pro and Tech/Tech Evo levers only.
- LEV INTEGRA'S internally routed cable significantly cleans up the look of your bike.
- With shifter cables, brake lines and lock out cables clamped and zip tied to your carbon fiber piece of art, mountain bike frames have begun to look like an IT guy's fantasy.
- Clear the clutter while benefiting from legendary LEV technology – now available in 175mm travel.
- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution.
- Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.
There’s something about 7/8" (aka 22.2mm) handlebars that seem to attract the most abusive riders out there, so we’ve taken our popular Boxcar stem and beefed it up even further!
We already use 2024 alloy for all of our boxcar stems, as it has a higher fatigue and yield strength than 6061. We made sure the clamp was extra thick on this version and even added 2 more high-strength stainless faceplate screws.
Is it overkill? Definitely. You’d have to run this thing over in a tank to damage it, but we’re pretty sure this will be the last 7/8" stem you’ll ever have to buy.
- Machined in sunny Chico, California
- 6 bolt faceplate (stainless T25 bolts)
- 7/8" (22.2mm) bar clamp
- Stack height: 36mm
- 180g
The new 6OX MTB Active S-Tube Saddle combines the advantages of the successful saddle models ERGOWAVE and ERGOLUX. As part of the product development, the shape of the saddle was adapted and perfected for use on MTB, E-MTB and Gravity Bikes.
The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sitbones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.
The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs of rough off-road terrain.
The wave-shaped 6OX profile, which contours from the rear to the front, offers a perfect form-fit shape for most sitbones. The correct width saddle is a prerequisite for maximum performance.
The SQlab active-saddle technology lets the saddle follow the pedaling motion as comfort increases, the vertebral discs are mobilized and pressure on the seat bones is minimized. Again, the correct width saddle is a prerequisite for maximum performance.
- Area of use: MTB Tech & Trail, MTB Ebike, Gravity
- Length (mm): 280
- Weight (g): 270, 280, 285
- Hardness in SQ-shore: 50
- Relief of perineal area (%): 72
- Material Rails: Ti / S-Tube Alloy
- Active Technology: 3 different elastomer dampers (can be interchanged)
- Max. Weight (kg): 110
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Beveled Banjo Hydraulic Brake Hose Kit fits SRAM road bike brakes that feature a beveled banjo fitting at the lever
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, extra banjos, hose clips, and T8 Torx L-Key
- Compatible with Flat Mount, RED 22, Force 22, Rival 22, Force 1, Force CX1, Apex1 HRD, S700
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Force XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity, and advanced chain management mean this derailleur does exactly what you want when you need it.
NOTE: Does not include eTap battery or charger. Compatible with existing eTap batteries.
- Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability
- 1x specific for use with 10-44T XPLR and 10-36T cassettes
- SRAM AXS enabled, allowing easy personalization
- Chain management keeps the drivetrain quiet and secure
- Large X-SYNC pulleys for increased durability and efficiency
- Cage Material (RD): Aluminum
- Pulley Bearings Material: Steel
- Max Tooth: 44
NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
X01 Eagle is the drivetrain for riders and racers who push for the purpose of gaining elevation. Whether having fun, progressing skills, or taking the win, X01 Eagle is designed and refined to support riders with the power of expanded capability.
Includes:
- Rear Derailleur with Battery and Battery Protector
- Rocker Paddle Controller with Clamp
- Charger/Cord
- Chain Gap Tool
Page 1 of 203
Next page