Filter By:
Full-Suspension
$9,499.00
Plug Into The Vibe
Up, down, all around.
The Repeater loves it all.
Buckle up and get ready to charge, the Repeater is down for anything. With 160mm travel, 29 inch wheels, the Shimano EP8 motor system, and a 630w battery, you can maximize fun on the ups and the downs. Whether it's a quick rip after work, ditching the shuttle truck, or just the pure joy of exploring that you are after, the Repeater loves it all. Like all of our other beloved bikes, the Repeater has SBG geometry and our GiddyUp suspension, so you'll feel right at home the moment you turn on the power.
$7,199.00
THE HARD CHARGING ALL-ROUNDER.
The Transition Sentinel inspires confidence like you’re wearing full body armor.
It’s forgiving do-it-all attitude truly blurs the lines between planted bottomless sender and playful poppy trail pony. Whether you’re chasing EWS dreams or just a weekend afternoon escape, it will bring out the best in you. So easy to get acquainted with you’ll find yourself sending lines, jumps and maneuvers you always felt were beyond your ability. Where before you went around, now you go over. Where you pushed up, now you pedal. Where you rolled, now you boost.
$2,308.95
$3,299.00
30% Off
ARE YOU THIS RIDER?
Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike.
- Intended Use: Trail To Light Enduro
LINKAGE UPDATE
Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks.
INTERNAL CABLE ROUTING
Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected.
ASYMMETRICAL DESIGN
Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight.
THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT.
Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.
$4,499.00
Big mountains, epic passes, and all-day ripping descents. If you live for the alpine adventure and gravity-fueled downhills, look no further than the Alpine Trail series. Updated for 2021, the Alpine Trail is built around the longest travel version of our critically acclaimed MultiTrac platform with progressive slack headtube/steep seattube geometry, low-slung aluminum frames, and 29" wheels. The Alpine Trail is here to conquer all singletrack in its path.
Unidirectional Carbon Fiber Frame
- Alpine Trail Carbon 1 and 2 models feature high modulus carbon fiber and monocoque construction to deliver the strongest and stiffest Alpine Trail to date.
Modern Geometry
- The Alpine Trail is at the cutting edge of aggressive enduro geometry, bringing you the best long travel bike for the job. A 63.5° headtube angle, 78° seat tube angle, short 430mm chainstays, and a long front center unlock the trail for pure long travel bliss.
Functional Long Travel
- The Alpine Trail was built to give riders long travel with no sacrifice in pedaling efficiency, providing a bike that will outshine the competition on the climb and still allow you to hold it wide open on the descents.
$6,799.00 - $8,098.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides.
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn't wander while climbing, and doesn't hold you back descending. It works—all day up, all day down, all day in between.
TRACTION TUNE
Our custom-tuned front and rear suspension feature extra-light high-speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.
COIL COMPATIBLE
The Ripmo V2 is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo' dropper, mo' better. On small frames, you can run 125 – 150mm, depending on your preference and inseam length. On Medium, Large, and X-Large, a 160mm—or, why not run a 185mm? Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you're not limited by width.
BUSHINGS
Tired of hitting "purchase" on another set of bearings each season? So were we. That's why we use bushings where they make sense, and bearings where they don't. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance-free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest-grade materials and optimized for the best strength, weight, stiffness, and ride performance-no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock, and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you're too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A polycarbonate downtube protector deflects debris, while molded rubber swing arm protectors keep things quiet and clean. And, our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
$7,399.00 - $8,698.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides.
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn't wander while climbing, and doesn't hold you back descending. It works—all day up, all day down, all day in between.
TRACTION TUNE
Our custom-tuned front and rear suspension feature extra-light high-speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.
COIL COMPATIBLE
The Ripmo V2 is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo' dropper, mo' better. On small frames, you can run 125 – 150mm, depending on your preference and inseam length. On Medium, Large, and X-Large, a 160mm—or, why not run a 185mm? Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you're not limited by width.
BUSHINGS
Tired of hitting "purchase" on another set of bearings each season? So were we. That's why we use bushings where they make sense, and bearings where they don't. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance-free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest-grade materials and optimized for the best strength, weight, stiffness, and ride performance-no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock, and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you're too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A polycarbonate downtube protector deflects debris, while molded rubber swing arm protectors keep things quiet and clean. And, our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
Page 1 of 1