Filter By:
Parts & Accessories
$12.00
The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder.
- Self-closing silicone stream valve
- Leak-tight seal against escaping liquid
- Taste-neutral material for pure flavor
$48.00
The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%.
- Can be filled with hot or cold water (up to 60°C)
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Volume: 3L
- Weight: 140g
- Measures: 18 x 42 x 1cm
$12.00
- Extra-strong magnet keeps the drinking tube in position during your activity.
- Two-piece design for attachment to the hip belt, backpack or vest
- Fits all EVOC hydration systems (excluding insulated drinking tubes)
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment
- Designed to be easily flipped to provide either left or right hand bottle access
- Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset
- Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
$7.50
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
$45.00
- Leak-proof and easy to fill with SLIDE SEAL
- PLUG-N-PLAY allows quick removal of the hose
- Free from BPA and PVC
$45.00
The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%.
- Can be filled with hot or cold water (up to 60°C)
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Volume: 2L
- Weight: 130g
- Measures: 17 x 32 x 1cm
$50.00
The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow.
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Can be filled with hot or cold water (up to 60°C)
- Volume: 2L
- Weight: 140g
- Measures: 17 x 32 x 1cm
$99.95
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft
• HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position
• STABLE DESIGN - Stiffest mount on market with alloy arms
• FLARED CAGE DESIGN - Makes inserting bottle easy
• HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches
• ANTI-VIBRATION - Locking hardware for safety and security
• REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately)
• Aircraft aluminum mount
• Carbon fiber bottle cage
• Weight: 141.5 grams
Why single rear carriers?
• Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag.
• Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA.
• Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
$99.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$5.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
$102.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$127.95
Introduction
- Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years.
- Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag.
Storage
- We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP.
- As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG.
- Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG.
Hydration
- With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers.
Adjustable Mounting
- One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation.
- In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions.
Lightweight
- We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams.
Bottom Line
- The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros!
Includes:
- Carbon Sonic chassis
- One Pair X-Straps
- All hardware and instructions
Material
- Carbon Fiber proprietary unidirectional orientation.
Weight
- Chassis 49 grams, Hardware 30 grams. Total 79 grams
Limited Lifetime Warranty
- Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.
$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 6061-T6 Aluminum
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.
$9.00
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount
(Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$11.95
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options.
- Fits tubes 20 - 60mm
- Engineering grade polymer
- Max load: 1.5 kg / 3.31 lb
- 26 g / 0.92 oz (2 pcs)
$12.99
SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.
$11.00 - $12.00
Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.
$34.95
The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.
$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$7.95
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
$8.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
$20.00
Flexible option for fastening additional bottle holder or other accessories to the bike frame.
Are the holes in your bike frame in the wrong place or already in use? Using the O-Strap Bottle Cage Mount, you can additionally attach bottle holders or other items of equipment wherever you want them. This practical accessory is suitable for tubes of up to 60 mm diameter, whether on the frame or other parts of your bike.
Page 1 of 3
Next page